Vivo 1820 PD1818HF Security MTK Da And Auth Preloader File, For One Click Lock Remove, Frp Reset Bypass, Gmail Lock Forget, Full Flashing, Format, Software Update With Sp Tool
Error Fixed While Update Software Vivo 1820 PD1818HF?
1 Whenever you used to flash in SP TOOL you would get brom error
2 When you click on the start button in SP TOOL, only the red line will move forward and then stop
3 Any type of error used to come after increasing the red line
4 You can use this file in any professional tool
Why would you want to update this file for Vivo 1820 PD1818HF?
1 The battery of the phone must be at least 30% charged
Because if while the flashing process continues, if the battery is discharged, then your phone can be turned off.
2 Use the same model file as your model
Because if this is not the case, there may be an error in the tool or your phone may be bricked.
3 Plug the USB cable into the back of your computer CPU
so that the power supply works properly
4 If you use a laptop, then keep the battery charge of the laptop
5 If your phone still has a warranty then give it to the service center
Keep these things in mind while writing flash or lock file Vivo 1820 PD1818HF
1 The battery of the phone must be at least 30% charged
Because if while the flashing process continues, if the battery is discharged, then your phone can be turned off.
2 Use the same model file as your model
Because if this is not the case, there may be an error in the tool or your phone may be bricked.
3 Plug the USB cable into the back of your computer CPU
so that the power supply works properly
4 If you use a laptop, then keep the battery charge of the laptop
5 If your phone still has a warranty then give it to the service center

Now let's know how to flash Vivo 1820 PD1818HF
Download all files from the above links And
Extract all files, Tool, and Driver
Install libusb win32 devel filter 1.2.6.0
Install MediaTek USB Driver
Open MCT MediaTek USB Driver Tool Then Click on Bypass
Power off Your Vivo 1820 PD1818HF Phone Then Press and hold Volume Up And Down on Both Key Then Insert USB Cable
Now Wait Until Completed
Open SP flash tool
Choss on Scatter-loading choose button and select MT6765_Android_scatter.txt file
Click on Download-Agent and Select MTK_AllInOne_DA_mt6xxx_mt6xxx.bin File from Flash Tool Folder
Click on Authentication File and Select auth_sv5.auth File from Flash Tool Folder
Now go to Format Tab and click on Manual Format flash
Lock Reset Code
This is an Example Code, Don’t Use This
Copy 0x25xxxx code and paste it to Begin Address[HEX]
Copy 0x000000 code and paste it to Format Length[HEX]
Then FRP Unlock Code
This is an Example Code, Don’t Use This
Copy 0x15xxxxx code and paste it to Begin Address[HEX]
Copy 0x10xxxx code and paste it to Format Length[HEX]
Click on the Start button
Wait Until Completed
Done