Only For A415F U1 Dead Boot Repair Scatter Firmware
Without a Password you can download this Samsung A415F Dead Boot Repair Firmware file, now you can use it with the sp tool, Even if your phone is stuck on the hang-on logo, you can probably fix it with the help of this file. If you want to update software or flash your android smartphone then you can do it with the help of a full flash file
Why would you want to update the A415F U1 Dead Boot Repair Scatter File?
1 if after flash phone completely off
2 after USB connect sow only MTK Port Now you can write this file For alive your phone
3 if the phone off completely off when software is updated with the Odin tool or update officially
4 When there is an error or app-related problem in your phone.
5 When your phone is having a network problem or very low network capture
Keep these things in mind while writing A415F U1 flash file
1 The battery of the phone must be at least 30% charged
Because if while the flashing process continues, if the battery is discharged, then your phone can be turned off.
2 Use the same model file as your model
Because if this is not the case, there may be an error in the tool or your phone may be bricked.
3 Plug the USB cable into the back of your computer CPU
so that the power supply works properly
4 If you use a laptop, then keep the battery charge of the laptop
5 If your phone still has a warranty then give it to the service center
Now let's know how to flash A415F U1
Download all files from the above links And
Extract all files, Tool, and Driver
Install libusb win32 devel filter 1.2.6.0
Install MediaTek USB Driver
Open MCT MediaTek USB Driver Tool Then Click on Bypass
OFF Phone Then Press and hold Volume Up And Down Both Key Then Insert USB Cable
Now Wait Until Completed
Open SP flash tool
Choss on Scatter-loading choose button and select MT6765_Android_scatter.txt file
Click on Download-Agent and Select MTK_AllInOne_DA_mt6xxx_mt6xxx.bin File from Flash Tool Folder
Click on Authentication File and Select auth_sv5.auth File from Flash Tool Folder
Now go to Format Tab and click on Manual Format flash
Lock Reset Code
This is an Example Code, Don’t Use This
Copy 0x25xxxx code and paste it to Begin Address[HEX]
Copy 0x000000 code and paste it to Format Length[HEX]
Then FRP Unlock Code
This is an Example Code, Don’t Use This
Copy 0x15xxxxx code and paste it to Begin Address[HEX]
Copy 0x10xxxx code and paste it to Format Length[HEX]
Click on the Start button
Wait Until Completed
Done
