LYF LS-5016 Wind-7i Firmware Blue Display fix solution

RomFast > Mobile Brands > Lyf And Jio > Smart Phone Android os > LYF LS-5016 Wind-7i Firmware Blue Display fix solution

Here is LYF LS-5016 Wind-7i Latest Firmware For unbrick your devices

like a problem

after flash blue display or dead 

after flash hang on logo or stuck on logo restart 

This is an official firmware for your device
If your phone is dead after updating the software then you can turn it back on with this firmware
Just have to do it right
Here is Flashing tutorial
-Install driver Qualcomm
-Install QPST_2.7.472.4 tool setup
-Copy full folder “Firmware folder “and past “c” drive
-Now open ”QFILL” Tool and click “Flat Build” option
-Click the browse button and go to “c” drive firmware folder
-Now select prog_emmc_firehose_xxxx_ddr.mbn file
-Now Click “Load XML”and select “rawprogram0” and “patch0”
-Turn off mobile and press volume up and down key then insert the USB cable
-After Qualcomm Qloader driver appearing top of the tool click “download” Button
-And wait
Note =Warning! Do this at your own risk! AND All your phone data will be lost
And be careful because If you take the wrong file, your phone will completely dead
so pls match your hw ver.from device back sticker
and do this process

LYF_LS-5016_Wind-7i Blue Display fix solution

Note: If Any Problem Comment Here.Like Firmware Ver Or Any Error Problem .

Leave a Reply

Your email address will not be published. Required fields are marked *