How to Flash Moto Mtk Based Smartphone

Smart Phone Flashing Process

Step 1:First Download The Mtk Driver, And Install It.Watch This Video If You Can Not Understand

Step 2:After That Download The New Version Of SP tool {Smartphone Tools} And Extract It From The Winrar Software

Step 3:Now Get Your Smartphone To Download The Firmware According To Its Model, And This Also Extract Into Winrar Software Like Sp tool

Step 4:Now Open The Folder Of The Sp Tool And Open It By Clicking On The Flash Tool Icon Twice

Step 5:After Opening, You Should Go To The Firmware Folder By Pressing The Button Of The Scatter Loading And Selecting The Scatter File.

Step 6:After the scatter file, you have to choose the Firmware Upgrade by looking at the photo given click download button.

NoteDo not choose "Format All + Downloads" or else your IMEI can be erased.

Step 7:Turn Off Your Smartphone, If Possible, Remove The Battery Once And Put It Again And Now Connect The Usb Cable.

NoteIf You Fail 1st Try. No Problem Try Again.

Step 8:Now a little process will take about three to five minutes.

You can disconnect your phone after Done logo arrives

Note1:Be sure to back up your data before flashing etc,Everything was erased after the flash

Note2:If there is a problem in your smartphone then flash it. And if you do not have any problems in your smartphone, do not flash it by yourself, because this way your smartphone can be damaged.

Note3:You are doing all this on your own responsibility.If your phone is damaged while flashing, then we will not have any responsibility.

Made with ♥ in India

Copyright © 2014-2017 All Rights Reserved.